LIME PLASTER DM-1
DESCRIPTION
Innovative lime plaster, innovative lime plaster, energy tanks for the health of all of us … we spend our lives in closed rooms, so it is worth taking care to ensure that these solutions are made in a healthy and friendly technology. DM-1 Ecological limestone plaster is vapor permeable, it neutralizes fungi and is hypoallergenic. The versatility of lime plasters for the possibility of their use outside and inside the building, such rooms (rooms, living rooms, staircases, basements, garages) or moisture (kitchen, bathroom, laundry room).
Versatility also means that without the use of chemical adhesives improving the adhesion of plaster to the substrate, lime plasters can be applied on both concrete and silicate brick, red ceramics, concrete blocks and cellular concrete blocks. Additionally, DM-1 lime plaster offers high resistance to biological corrosion (fungi, algae etc.). Therefore, in such facilities as hospitals, nurseries, kindergartens, rooms for allergy sufferers, where high resistance of materials to biological corrosion is required, there is no alternative to lime plaster.
PARAMETERS
-
Lime renovation plaster, packed in 10-liter containers, 15 kg each,
-
Efficiency – estimated efficiency 1.3 kg / m2 per 1mm.
-
Fraction 0.5-1 mm.
Weight: 15 kg COMPOSITION: Water, sand, perlite, hydrated lime, resin set, hydrocellulose <3%
DM-1: Ecological limestone plaster
- he is very flexible
- ready to use
- easy to apply
- resistant to shocks,
- works, bends with the ground – it is devoid of mesh cracks,
- typical for cement-lime mortars high bending strength
- resistant to weather conditions
- high hypoallergenic alkalinity intended
- for indoor and outdoor use
- ideal for renovation of monuments
APPLICATION:
- concrete
- cement
- limestone
- silicate
- wooden
- plaster
- from clay
- from Earth
- glass
- plexiglass
- styrofoam
- straw
.
- and many others
An additional advantage of the DM-1 lime plaster is the possibility of applying the product on polystyrene or wool facades as a replacement for traditional decorative and mosaic plasters.
The above-mentioned substrates can be painted with oil paints, etc. There is a possibility of mechanical processing by cutting the substrate together with the mortar dried on it with an angle saw or a wood saw, depending on the type of substrate. It is possible to level the surface of the mortar two days after laying with a polystyrene scraper. Quick and very easy application of the mortar on the walls / it is applied like glues / then rubbed off like ordinary cement-lime plasters.
Laying thickness from 2mm to 30mm. Fantastic adhesion of the mortar to the substrate during and after application.
This mortar is an ideal solution for the renovation of monuments. Due to the fact that it has excellent adhesion, it can be applied over old plaster. We apply from 2mm to 30mm. The mortar can be used as a needle for clay plaster. This mortar is ideal for clay, strengthening surfaces and increasing resistance to weather conditions. Substrate preparation: Prime the substrate with EcoTecto Mun-B primer.
HOW TO USE:
Open the container with the mortar. Stir with a high-speed mixer for 2 + 3 minutes, until a fluffy and plastic mortar is obtained. If necessary, add to 0.2 liter of water for 10 liters of mortar and mix again with a high-speed mixer, until a homogeneous consistency is obtained. Apply the mortar with a metal trowel (upward movement). After applying the DM-1 lime mortar and its leveling, wait until it hardens slightly. Then we rub with a plastering sponge, machine or manually.
NOTE: In the case of larger irregularities, i.e. more than one centimeter, you should: level the unevenness and wait until the mortar is dry, re-prime the substrate and then apply another layer of DM-1 lime mortar. The last layer should be of one thickness
Ecotecto Sp. z o.o.
32-400 Myślenice,
ul. Słowackiego 36A
biuro@ecotecto.com