STUBBLE GROUND WITH Mun-B QUARTZ SAND
CHARACTERISTICS AND ADVANTAGES
- Ready to use
- For indoor and outdoor
- Ecological, water-dilutable
- Safe to use
- Simple in application
- Very good adhesion to smooth surface
The product is certified by the National Institute of Hygiene PZH
WE APPLY ON:
MUN-B PLASTER CONTACT putty primer with quartz sand, can be used on any type of construction substrate (brick, block, concrete, plaster …). Thanks to the use of special resins and quartz sand, the product has a high affinity, especially for difficult substrates, such as:
and many others
Perfect as a base for clay, gypsum, cement-lime and lime plasters. The substrate must be dry, hard, compact and free of dust. The substrate contaminated with grease or oil should be degreased with an appropriate preparation. Weak or loose substrates (e.g. bituminous ones) should be removed before applying MUN-B PLASTER KONTAKT.
MUN-B PLASTER KONTAKT is a ready-to-use product. Before starting work, the product should be mixed well. It is best to apply MUN-B PLASTER KONTAKT to the substrate with a brush or roller. Further work should be continued after the product is completely dry.
Depending on the substrate, approx. 6-8 m 2 from 1 liter.
depending on the temperature 3 – 7 hours **
Application temperature +5 – +25 o C
* At an air temperature of +20 o C and a relative humidity of 60% (higher temperature and lower humidity shorten the drying time, lower temperature and higher humidity extend the drying time)
- Buckets 3l, 5l, 10l
Weight: 15 kg. COMPOSITION: Water, resin set, quartz sand, cellulose <3%>
Protect the product from direct sunlight
Store in tightly closed containers
Protect against freezing
If swallowed, see a doctor immediately
The manufacturer and distributor are not responsible for the consequences of using the product contrary to the above recommendations and the principles of good construction practice.